For Sale. Stock Exhaust for a 2008 Avenger R/T. It has 13,710 miles on it. Still in beautiful shape as you can see.
9'1" long
39.5" wide outside to outside at the tips.

New would be ~$350. I would like to let it go for $150.00
Reasonable offers accepted.

I will only accept PayPal or cash. I live in the Metro Detroit area.

Heres what it sounds like:
http://www.avengerforumz.com/showthread.php?t=39907

P.S. It takes about 15 minutes to remove your old exhaust and bolt this on. Connects right behind the catalytic converter and will install on any model Avenger - 2.4, 2.7 and 3.5L. bump.

Will fit on any Avenger. Bolts on in 15 min. Bump.

bump. Would love to sell this. Ive got a couple of upgrades in my future I need to finance. ANy 2.4L or 2.7L owners that would like to have a dual exhaust?

No good to me mate sorry, shipping will kill me! Being over the pond and all.

in photo 3 is that a dent in the muffler?

in photo 3 is that a dent in the muffler?

Not sure where you are referencing. The top of the "suitcase" has lots of little bumps in it.

There is a factory clearance depression just after the turn towards the rear from the resonator. Not a dent. Something done to the pipe at the factory.

Eric

attached is the dent I am referring too,

also waht is shipping to 98055? and also it just bolts on nothing else needed other than the rubber hook catchers?

attached is the dent I am referring too,

also what is shipping to 98055? and also it just bolts on nothing else needed other than the rubber hook catchers?

Man, I have no idea what shipping will be. My bet is rather high, going 2/3 across the US. Would probably have to go freight. Ill call my local shipper tomorrow and ask. It would probably drop price if I cut it down into smaller pieces but then you would have to get someone to weld it back together.

Yes, it will literally just bolt on and should use the hangers from the existing exhaust.

well i would never want it cut. i might just have to get it from moparparts.

attached is the dent I am referring too,
Also it just bolts on nothing else needed other than the rubber hook catchers?

The small dent is a "clearance bend". Yes, just bolts on and could reuse the existing rubber hook catchers.

is the exhaust still for sale? I live in the windsor area and would be interested in picking it up...

is the exhaust still for sale? I live in the windsor area and would be interested in picking it up...

Yes, it is still for sale. I live about 1 mile from Pine Knob. Ill PM you my home phone #.

Eric

you say it bolts up the the 2.4 how so if our cars were built with a single exhaust..LMK might be interested..

you say it bolts up the the 2.4 how so if our cars were built with a single exhaust..LMK might be interested..

greetings!

Take a look at the picture! Even an R/T starts with a single pipe off the engine out of the catalytic converter. The exhaust I purchased from whitewolf came OFF his 2.4L and bolted right onto my 3.5L R/T. Took less than 15min.

The only thing you will need is the rubber hangers from your existing exhaust and MAYBE an additional hanger for the driver side pipe (but whitewolf told me his 2.4L already had the hanger ring for that side).

EAK

you say it bolts up the the 2.4 how so if our cars were built with a single exhaust..LMK might be interested.. The thing will fit, Don't worry.

This bad boy is still for sale. Anyone interested?

Eek, I'd love to buy it, but I live all the way in Thunder bay :S I'm looking for dualie exhaust, and the bolt-on things really appeals to me. I want something I can do for myself!

It is 9'1" long and 34.5" wide. To ship it would require a dual pallette unless I cut it in half.

Still for sale. Anyone?

what would this sound like on the 2.4? would it give that "ricer" sound? or the deep sound like the RT?

Howdy!

Im not sure what it will sound like. I know there are a couple of folks who have put an R/T exhaust on a 2.4L. I would think it would sound better but the biggest difference will be you will have dual tailpipes rather than a single.

Im ready to get rid of this thing. First $100 takes it.

good price !!!! for a dual tail pipe set up

Im ready to get rid of this thing. First $100 takes it.Did you ever get an estimate for shipping? I'm curious. Thanks

Did you ever get an estimate for shipping? I'm curious. Thanks

It depends on your location but, without cutting it in half, it will be 2 full pallets in length and would cost ~$200.00 to ship to locations in the continental US. A bit more to California and Oregon.

I'll give you $150 right now threw Pay Pal if you can ship to Northwest Ohio.

$150.00 wouldn't cover the shipping to you.

This bad boy is still for sale. Anyone in Michigan with that skinny single pipe want to upgrade to a nice looking dual pipe?

BTW, I was driving home on Friday and I saw what must have been a 2009 R/T that had R/T badges but it only had the single exhaust, SXT headlights lights and wheels.

Seen that I've just discovered to don't be able to send you pm's at least while I'll not post more than 25 posts, I post here my reply about what you said me about expeditions to Italy.

Sorry for the late reply, I was on vacation.

I understand and I agree with you doubt about the disassembling of that.
I'll try to find another exhaust system more easy to get.
As mentioned here in Europe exists too few avengers to easily find it, so I'm looking for that in USA.

Thanks Again
Windragon

The R/T Dual Exhaust is still for sale if anyone is interested. Im still offering it for $100 to the first person who can come and get it.

The R/T Dual Exhaust is still for sale if anyone is interested. The first person who can come and get it, make me an offer and it is yours. I won't let it go for free, but it has to go.

I have been wanting the dual exhaust... I may have to make a road trip... I will keep you posted... Can you let me know whipping on this to the town I sent to you in a PM? Thanks.

I have been wanting the dual exhaust... I may have to make a road trip... I will keep you posted... Can you let me know whipping on this to the town I sent to you in a PM? Thanks.

It would be REALLY expensive. Think 2 pallets and freight charges.

Maybe I should just take a road trip... lol.

Maybe I should just take a road trip... lol.

Make me an offer and come get it.

Well I doubt I will be able to come and get it... looks like the budget is getting slim... I will keep you posted. Thanks though... :(

OK, going once, a complete dual exhaust from a 2008 Avenger R/T. Will bolt on to any size engine and use the existing hangars. Bring $20.00 and come get it. If I haven't sold it by 14/November its going out in the trash.

Eric

OK boys. Last chance. You want it? Come get it by Wednesday evening or it goes in the trash. $20.00.

EAK

WOW come on!! Some one please take this I would hate to see it hit the trash !! I sold mine and I helped another awd owner do an exhaust I ended up with his and gave it to a friend to use . No need for this to go to waste at 20. If I was closer I would take it just to take it !!!

Come on Sphinx its only $20, go save this system from a horrible death.

~Mark

I think he is covered :Wow1:

that sucks wish i lived closer or i would come get it cause i actually want it but alas i live in florida and that would be way to far to go... sniff sniff tear

Did you toss it or sell it ?

Did you toss it or sell it ?
still sitting under my deck. Trash pickup is Friday morning.

:smileup:

If you still have the exhaust I would be willing to get it. I am in Cleveland so a few hour drive would be worth it... Let me know...

:smileup:

If you still have the exhaust I would be willing to get it. I am in Cleveland so a few hour drive would be worth it... Let me know...

It is still available but oinly until next Thursday. I had to make special arrangements for my trach co. to pick it up.

If you want it, come get it.

Eric
eak@kimminau.org

I think he is covered :Wow1:

The exhaust has been given away. This thread can be closed.

Thanks!

:smileup:Thanks will do glad you were able to find it a home :smileup: