Dodge Avenger Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
2011 Mainstreet 3.6 engine have replaced shocks and struts. (Fully loaded) New sway bar end links but still have as before replacing with new parts, a dull thudding bumping coming from front end both sides while on a gravel drive at slow speed( 10-15 mph??? What could it be???
 

·
Registered
Joined
·
5,716 Posts
Could be worn ball joints or control arm bushings.
 

·
Registered
Joined
·
5,716 Posts
Could also be a worn motor mount or trans mount.
 

·
Registered
Joined
·
29 Posts
2011 Mainstreet 3.6 engine have replaced shocks and struts. (Fully loaded) New sway bar end links but still have as before replacing with new parts, a dull thudding bumping coming from front end both sides while on a gravel drive at slow speed( 10-15 mph??? What could it be???
I would say like intrepid did control arm bushings too much playing the motor mount or I also changed my sway bar links on the end but turned out they loosened up and small little bumps would cause it to make the same noise so I would check those again and make sure definitely tight
 
1 - 5 of 5 Posts
Top